Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the Intake Manifold Sensor Located on the Nissan Sentra and How to Replace It?

Model: Nissan Sentra B17, MK 7 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022
Part: Checks and maintenance

See other generations:
Video tutorial

In this video, you can see where the intake manifold sensor is located on the Nissan Sentra and how to proceed if you need to replace it. As shown, it is located at the rear of the air filter box in front of the windshield, right at the junction with the intake manifold.

To remove it, simply press the retaining clip and disconnect the connector by pulling it upward.

Once done, you can unscrew the two screws and extract the sensor from the housing. To install the replacement, just follow the reverse procedure.


Updated on 4 August 2026 by ScegliAuto


Related tutorials

Where are the fuse boxes of the Nissan Sentra B15 located?
Where are the fuse boxes of the Nissan Sentra B15 located?
Nissan Sentra (2000-2006 / B15, MK 5) In this new guide you will find the description of all the steps necessary to locate both fuse boxes inside your Nissan Sentra B15. Let's start with …
Where to Find the Cabin Fuse Box on a 2013 Nissan Sentra
Nissan Sentra (2012-2022 / B17, MK 7) To easily and safely locate the cabin fuse box on your 2013 Nissan Sentra, follow these steps. First, open the driver's side door and remove the plas…
Where is the Fuse Box Located on the 2015 Nissan Sentra?
Where is the Fuse Box Located on the 2015 Nissan Sentra?
Nissan Sentra (2012-2022 / B17, MK 7) In this new mini guide for your 2015 Nissan Sentra, find out where the fuse box is located. To locate it quickly and safely, follow these steps. Firs…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos