Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Nissan
    3. :
  3. Qashqai
    4. : How to replace the Nissan Qashqai J10 diesel filter

Nissan Qashqai - Video tutorial

Model: Nissan Qashqai J10 - Years 2006-2014
Part: Diesel filter
Operation: How to replace the Nissan Qashqai J10 diesel filter

Replacing the diesel filter is a fairly simple operation to perform, but it is recommended to use the utmost care and delicacy in handling the pipes connected to the filter itself as it is of the rigid type. they could be easily damaged; the filter is located immediately behind the coolant tank and start by unscrewing the fixing nuts of the plate surrounding the filter in order to remove it; then press on the safety devices that fix the hoses to the filter and extract them, also releasing the support tabs of the filling pump to have more space for maneuver; then extract the split pin to remove the other tubes, loosen the filter fixing clamp to complete the disassembly and apply it to that one and then reconnect all the tubes and repeatedly squeeze the bulb to fill the filter before starting the engine.


Posted on 1 September 2023 by ScegliAuto

    Frequently Asked Questions

    • Qashqai 2006-2014 - How much does it cost to replace the diesel filter in the Nissan Qashqai 1.5 DCI? Read Answer
    • Qashqai 2006-2014 - How much does the diesel filter cost in the Nissan Qashqai? Read Answer
    • Qashqai 2014-2022 - Why did the lamp showing an ampoule come on in the Nissan Qashqai? Read Answer
    • Qashqai 2014-2022 - Diesel filter lease on Nissan Qashqai? Read Answer
    • Qashqai 2006-2014 - Where is the Nissan Qashqai diesel filter located? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos