Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Nissan
    3. :
  3. Qashqai
    4. : How to remove the diesel filter on Nissan qashqai

Nissan Qashqai - Video tutorial

Model: Nissan Qashqai J10 - Years 2006-2014
Part: Diesel filter
Operation: How to remove the diesel filter on Nissan qashqai

Let's see how to replace the diesel filter present on a Nissan Qashqai: we lift the car on a column bridge or a special jack (if the filter is located in the lower part), we identify the diesel filter. With a large screwdriver we unscrew the screw that tightens (we can also use a socket wrench) the metal clamp placed around the container (where the diesel filter is located). Once the filter has been removed, remove it from the car (replace it with a new filter). Finally we reassemble the filter to the attached container of the diesel filter (we connect pipes and cables) and tighten the appropriate pins. We close the front hood finally.


Posted on 30 October 2023 by ScegliAuto

    Frequently Asked Questions

    • Qashqai 2006-2014 - How much does it cost to replace the diesel filter in the Nissan Qashqai 1.5 DCI? Read Answer
    • Qashqai 2006-2014 - How much does the diesel filter cost in the Nissan Qashqai? Read Answer
    • Qashqai 2014-2022 - Why did the lamp showing an ampoule come on in the Nissan Qashqai? Read Answer
    • Qashqai 2014-2022 - Diesel filter lease on Nissan Qashqai? Read Answer
    • Qashqai 2006-2014 - Where is the Nissan Qashqai diesel filter located? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos