Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Installing LED Interior Lights

Model: Nissan Juke MK 1 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Light bulb

See other generations:
Video tutorial

If you want to give your vehicle a more modern and appealing look, consider installing LED bulbs. You can purchase aftermarket kits that already contain the correct number of bulbs with the appropriate fittings for this facelift.

Start with the interior light, then move on to the boot light, number plate lights, and finally the reversing lights: in this case, you will need to remove the rear lights to access the bulb holder and replace the bulb. If the LED bulb does not light up when inserted, rotate it 180 degrees in the holder, as LEDs have a polarity that must be respected.


Updated on 19 February 2026 by ScegliAuto


Related tutorials

How to Change the Cabin Filter on the Nissan Juke
Nissan Juke (2010-2019 / MK 1) The cabin air filter for this car model is located just behind the centre tunnel console. To replace it, you must remove the glove compartment from t…
How to Replace the Interior Light Bulbs on the Nissan Juke
How to Replace the Interior Light Bulbs on the Nissan Juke
Nissan Juke (2019-2026 / MK 2) To replace the interior light bulb on the Nissan Juke, use a tool to lever under the housing of the ceiling light so that it can be removed. After di…
Where are the Fuses in the Nissan Juke?
Where are the Fuses in the Nissan Juke?
Nissan Juke (2010-2019 / MK 1) The fuses in the Nissan Juke are located within dedicated fuse boxes found in the vehicle. Specifically, this model has three fuse boxes: the first i…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos