Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Nissan
    3. :
  3. Juke
    4. : How to change the cabin filter of the Nissan Juke

Nissan Juke - Video tutorial

Model: Nissan Juke MK 1 - Years 2010-2019
Part: Cabin air filter
Operation: How to change the cabin filter of the Nissan Juke

The cabin air filter of this car model is located immediately behind the console of the central tunnel but to be able to replace it, the glove compartment on the passenger side must be removed; start by opening the passenger side door to remove the gasket from the door pillar and remove the dashboard side cap; at this point, open the door of the glovebox, release the support piston and the side guides which act as limit switches to be able to remove it; then unscrew the fixing screws of the storage compartment and remove it from its seat by disconnecting the courtesy light sockets; at this point it is possible to reach the air conveyor and remove the cap to extract the old filter and insert the new one.


Posted on 17 September 2023 by ScegliAuto

This video is currently unavailable

Other guides that may interest you

    Frequently Asked Questions

    • Juke 2010-2019 - Where is the Nissan Juke cabin air filter located? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos