Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Nissan
    3. :
  3. Qashqai
    4. : Replacement of the front headlight bulbs of the Nissan Qashqai.

Nissan Qashqai - Video tutorial

Model: Nissan Qashqai J11 - Years 2014-2022
Part: Headlight bulb
Operation: Replacement of the front headlight bulbs of the Nissan Qashqai.

If the front headlight bulb of the Nissan Qashqai burns out, we must replace it as soon as possible for our safety and to avoid penalties. We open the hood of the engine compartment, position ourselves near the headlight that contains the bulb to be replaced. In the rear part of the headlight, we will find a plastic cover that we will open by rotating it, allowing us to remove the bulb with the connector that we will remove. We insert the new H7 bulb, reusing the metal mounting spring, onto the connector and place it in its socket. We put the plastic cover back on and turn on the headlights to verify the successful completion of the job.


Posted on 17 August 2023 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Qashqai 2006-2014 - How do you replace the front headlight bulb on a Nissan Qashqai? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos