Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Interior Bulbs of the Nissan Altima

Model: Nissan Altima L34 - Years: 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Interior dome light bulb

See other generations:
Video tutorial

This guide will show you how to disassemble and replace the dome light bulbs in the Nissan Altima, following the instructions below. First, get inside the vehicle and pry on the side of the dome light to detach and remove it; then remove and replace the bulb-type bulbs fixed to the socket, as shown in the video.

At this point, in the same way, replace the other bulbs in the other dome light, installing bulbs with the same base, following the video tutorial until the end for reassembly!


Updated on 19 August 2026 by ScegliAuto


Related tutorials

How to Replace the Interior Tail Light Bulbs in a Nissan Altima?
How to Replace the Interior Tail Light Bulbs in a Nissan Altima?
Nissan Altima (2018-2026 / L34) In this tutorial, you will see how to replace the interior tail light bulbs in the hatchback of a Nissan Altima, a very simple and quick operation. F…
How to Replace the Interior Light Bulb in a Nissan Altima?
How to Replace the Interior Light Bulb in a Nissan Altima?
Nissan Altima (2007-2012 / L32) To replace the interior light bulb in a Nissan Altima, use a tool like a screwdriver to pry off the dome light located in the center of the vehicle. …
How to Replace the Interior Light Bulb of the Nissan Altima
How to Replace the Interior Light Bulb of the Nissan Altima
Nissan Altima (2018-2026 / L34) This video shows the procedure to replace the interior light bulb in a 2019 Nissan Altima. The process is very simple and takes little time. You will…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos