Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Serpentine Belt on the Nissan Rogue 2.5

Model: Nissan Rogue S35 - Years 2008-2015
Part: V-belt

This guide will show you the main steps to remove and replace the serpentine belt on the Nissan Rogue 2.5L. First, lift the vehicle and start by removing the right front wheel; then remove the wheel well liner and loosen the belt tensioner to take the belt off the pulleys, as shown in the video. At this point, install the new V-belt in the correct direction; then manually rotate the engine to ensure proper seating, finally reassembling the front wheel well liner and then the wheel!

Updated on 21 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Serpentine Belt on the Nissan Rogue
How to Replace the Serpentine Belt on the Nissan Rogue
Nissan Rogue (2008-2015 / S35) Discover the main instructions in this brief and simple guide on how to remove and replace the serpentine belt on the Nissan Rogue. First, open the h…
How to Replace the Battery on a Nissan Rogue
How to Replace the Battery on a Nissan Rogue
Nissan Rogue (2014-2020 / T32) To replace the battery on a Nissan Rogue, open the hood to access the components inside the engine compartment. On the right side, you will locate th…
Replacing the Alternator on the Nissan Rogue
Replacing the Alternator on the Nissan Rogue
Nissan Rogue (2008-2015 / S35) Let's briefly go over the instructions to remove and replace the alternator on the Nissan Rogue, as well as the Nissan Qashqai. First, open the hood …

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos