Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the driver's seat in the Nissan Rogue?

Model: Nissan Rogue T32 - Years 2014-2020
Part: Seat

In this tutorial, we can see how to remove the driver's seat in the Nissan Rogue, a very simple and quick operation. Before proceeding, open the hood and disconnect the negative terminal of the battery to prevent accidental activation of the airbags. Start by opening the left doors, then move the seat back and, with a Torx T45 key, unscrew the two front bolts of the brackets. Then move the seat forward, unscrew the two additional bolts, and disconnect the yellow connector located under the seat. At this point, we can remove the seat from the cabin and install any replacement.

Posted on 26 March 2025 by ScegliAuto

Video tutorial

Related tutorials

How to set the correct time on the Nissan Rogue T32.
How to set the correct time on the Nissan Rogue T32.
Nissan Rogue (2014-2020 / T32) To set the correct time on your Nissan Rogue T32, it really only takes a few seconds. You just need to carefully read the following steps and put the…
How to reset the service light on a 2013 Nissan Rogue?
How to reset the service light on a 2013 Nissan Rogue?
Nissan Rogue (2008-2015 / S35) It takes less than a minute to reset the service light on a 2013 Nissan Rogue, and you can do it without any tools! The video shows how to do it. Fir…
Where to Find the Fuse Box of the Nissan Rogue 2
Where to Find the Fuse Box of the Nissan Rogue 2
Nissan Rogue (2014-2020 / T32) In this new guide dedicated to your Nissan Rogue Mk2, discover where the fuse box containing all the various fuses of the vehicle is located. First, …

Other guides you may be interested in

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos