Do it yourself
| ||||
|
Nissan Rogue - Video tutorial
Model: Nissan Rogue
T32
- Years 2014-2020 In order to remove the Nissan Rogue's steering wheel airbag you need to use an object that acts as a lever, such as a screwdriver, to release the internal fixing pins on the steering wheel. These pins are located in the holes in the rear of the steering wheel, on the right and left side. When the pins have been released, it will be possible to extract the airbag from its housing by disconnecting the connectors at the rear. Once the connectors have been removed, the new airbag can be inserted by connecting it to the connectors and securing it with the internal retaining clips.
Posted on 19 April 2024 by ScegliAuto
Other guides that may interest you
|
How to reset the TPMS light of the Volkswagen Polo 2011The orange tire light indicates the presence of one or more tires with an inflation pressure below the recommended limit. All this is easily solved by inflating them correctly or replacing them in the event of a puncture. After carrying out these operations it is necessary to reset the warning light and therefore also the sensor in order to have new reading data. All you have to do is start the car ignition and then fully open the glove compartment on the passenger side. Locate the two buttons in the right corner and press "Set". At this point the reset is complete and you can turn off the ignition. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.015
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |