Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Nissan
    3. :
  3. Rogue
    4. : How to replace the Nissan Rogue driver's airbag

Nissan Rogue - Video tutorial

Model: Nissan Rogue T32 - Years 2014-2020
Part: Airbags
Operation: How to replace the Nissan Rogue driver's airbag

Let's see in this short and simple guide how to remove and replace the Nissan Rogue driver's airbag, following the instructions below. First we get into the car and begin to unclip the airbag tabs that we find behind the steering wheel, using something as thin as a slotted screwdriver; once released, we can remove the steering wheel airbag by disconnecting the electrical connector on the rear. At this point we are going to replace the airbag with the new one, making the connection correctly and fixing it on the steering wheel.


Posted on 8 April 2024 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos