Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Nissan
    3. :
  3. Rogue
    4. : How to replace the serpentine belt of the Nissan Rogue

Nissan Rogue - Video tutorial

Model: Nissan Rogue S35 - Years 2008-2015
Part: V-belt
Operation: How to replace the serpentine belt of the Nissan Rogue

Let's find out in this short and simple guide the main instructions on how to disassemble and replace the serpentine belt of the Nissan Rogue. First we open the engine hood and start disconnecting our battery; we lift the car and remove the right front wheel and the wheel arch. At this point we loosen the belt pretensioner, using a socket wrench, in order to remove it; now let's replace the belt with the new one, of the right type and with the original spare part, inserting it correctly between the pulleys, applying the reverse procedure!


Posted on 9 April 2024 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos