Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to access the external fuse box of the Nissan Micra

Model: Nissan Micra K14 - Years 2017-2024
Part: Fuse box

Today's guide will show us how to access the external fuse box of the Nissan Micra, following the instructions below. First, we pull the lever located at the bottom on the driver's side, near the pedals, to open the car's engine hood. We then find the external fuse box to the right of the engine compartment by removing the plastic cover next to the battery, as shown in the video. Inside the cover, we will find the fuse diagram, which can also be found in the vehicle's user manual; this way, we can easily locate any faulty fuse and replace it with a new one.

Posted on 11 October 2023 by ScegliAuto

Video tutorial

Related tutorials

Nissan Micra K13 fuse box layout and location
Nissan Micra K13 fuse box layout and location
Nissan Micra (2010-2017 / K13) Let's see in this short and simple guide the layout and positioning of the fuse boxes of the Nissan Micra K13, following these simple steps. First we…
External fuse positioning of the Nissan Micra
External fuse positioning of the Nissan Micra
Nissan Micra (2010-2017 / K13) In this guide, we will see the instructions that will allow us to locate the external fuse box of the Nissan Micra. First, let's open the car's engin…
Where is the fuse box of the Nissan Micra located?
Where is the fuse box of the Nissan Micra located?
Nissan Micra (2010-2017 / K13) The 2017 Nissan Micra has two fuse boxes inside. The first fuse box is located inside the cabin, specifically behind a cover near the steering wheel.…

Other guides you may be interested in

Installation of Upgraded Intercooler Radiator with Pipes

Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille.

Watch the video!


by ScegliAuto

More videos