Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Start the Nissan Rogue in Case of Immobilizer Failure

Model: Nissan Rogue S35 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015

See other generations:
Video tutorial

Today's guide will show you the main steps to start the engine in case of a problem or failure with the immobilizer of the Nissan Rogue. First, open the hood and reset the ECU by disconnecting and reconnecting the battery terminals.

Now, get inside the vehicle on the driver's side and remove the plastic cover of the internal fuse box located next to the steering wheel, as shown in the video. At this point, install the indicated fuse, effectively bypassing the immobilizer, and then start the engine!


Updated on 22 August 2026 by ScegliAuto


Related tutorials

How to Replace the Radio Fuse in a 2009 Nissan Rogue
How to Replace the Radio Fuse in a 2009 Nissan Rogue
Nissan Rogue (2008-2015 / S35) The 2009 Nissan Rogue has two fuse boxes. The first box is located inside the cabin, specifically behind the driver’s side glove compartment. The sec…
Where are the cabin fan fuses located in the Nissan Rogue?
Where are the cabin fan fuses located in the Nissan Rogue?
Nissan Rogue (2008-2015 / S35) In this video, you can see which fuses control the cabin fan in the Nissan Rogue, specifically the first components to check in case of malfunction. …
How do you activate the cruise control of the Nissan Rogue?
How do you activate the cruise control of the Nissan Rogue?
Nissan Rogue (2021-2026 / T33) In order to activate the cruise control of the Nissan Rogue, you must first drive the vehicle until you reach the desired cruising speed: once this s…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos