Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Airbag and Steering Wheel from a Nissan Micra

Model: Nissan Micra K13 - Years 2010-2017
Part: Airbag

To remove the airbag (and then the steering wheel) from a Nissan Micra, you will need two thin screwdrivers. Use them to insert into the slots on the lower sides of the steering wheel, both on the right and left. Insert the two screwdrivers simultaneously and press firmly. By doing this, the airbag module will lift from its housing, allowing you to gently remove it by pulling it towards you. Carefully remove the clip from the yellow connector and then disconnect the yellow connector from its socket. The airbag module is now free. Next, remove the steering wheel. Disconnect the electrical connector from the socket. Using a 19mm socket spanner, unscrew the bolt securing the steering wheel to the column. Job done.

Updated on 24 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Steering Wheel on the Nissan Micra?
How to Replace the Steering Wheel on the Nissan Micra?
Nissan Micra (2002-2010 / K12) To replace the steering wheel on the Nissan Micra, you need to loosen the screws located at the lower rear of the steering wheel, removing them compl…
How to Replace the Steering Wheel on a Nissan Micra?
How to Replace the Steering Wheel on a Nissan Micra?
Nissan Micra (2002-2010 / K12) To replace the steering wheel on a Nissan Micra, you need to unscrew the two screws located at the back of the steering wheel that hold the airbag in…
Removing the Steering Wheel of the Nissan Micra
Removing the Steering Wheel of the Nissan Micra
Nissan Micra (2002-2010 / K12) In this video tutorial, see how to remove and replace the steering wheel and its airbag on the Nissan Micra by following these simple steps. First, o…

Other guides you may be interested in

How to Open the Bonnet on the Lancia Y

To open the bonnet on this vehicle, follow these simple instructions: first, open the driver's door and locate the lever positioned just below the dashboard, marked with an image of the vehicle with the bonnet open. Pull this lever towards you until you hear a "click" indicating the bonnet is released. Next, exit the cabin and stand in front of the bonnet to disengage the safety catch and complete the opening. To do this, slightly lift the bonnet, locate the yellow lever underneath, and pull it to the left to fully release and open the bonnet.

Watch the video!


by ScegliAuto

More videos