Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

External fuse positioning of the Nissan Micra

Model: Nissan Micra K13 - Years 2010-2017
Part: Fuse box

In this guide, we will see the instructions that will allow us to locate the external fuse box of the Nissan Micra. First, let's open the car's engine hood and start removing the plastic cover of the fuse box located on the top right; this way we will have access to all the external fuses, as shown in the video. Inside the car, we will find another fuse box; we use the user manual to find the fuse diagram and replace any faulty fuses with new ones if necessary!

Posted on 29 October 2023 by ScegliAuto

Video tutorial

Related tutorials

Nissan Micra K13 fuse box layout and location
Nissan Micra K13 fuse box layout and location
Nissan Micra (2010-2017 / K13) Let's see in this short and simple guide the layout and positioning of the fuse boxes of the Nissan Micra K13, following these simple steps. First we…
Where are the fuses on the Nissan Micra?
Nissan Micra (2002-2010 / K12) The fuses of the Nissan Micra are divided into the two fuse boxes that are installed on the vehicle: in this car model it is possible to find one box…
How to access the external fuse box of the Nissan Micra
How to access the external fuse box of the Nissan Micra
Nissan Micra (2017-2024 / K14) Today's guide will show us how to access the external fuse box of the Nissan Micra, following the instructions below. First, we pull the lever locate…

Other guides you may be interested in

Installation of Upgraded Intercooler Radiator with Pipes

Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille.

Watch the video!


by ScegliAuto

More videos