Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Cabin Pollen Filter

Model: Nissan Qashqai J10 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Air filter

See other generations:
Video tutorial

First, locate the position of the cabin pollen filter, which in this case is at the bottom of the right wall of the driver's seat. Specifically, it is to the right of the accelerator pedal, as indicated by arrow number one in the images.

To access the housing box, remove the wall starting from the area indicated by arrow number two in the images. To do this, unclip the four clips holding the wall in place.

Remove the cover of the filter box. Extract the old filter from its housing and insert the new one in the same position. Finally, reassemble everything by following the same steps in reverse order.

The maintenance operation shown in the images is performed on a Nissan Qashqai.


Updated on 21 February 2026 by ScegliAuto


Related tutorials

How to Replace the Cabin Air Filter on a Nissan Qashqai?
How to Replace the Cabin Air Filter on a Nissan Qashqai?
Nissan Qashqai (2006-2014 / J10) Before starting, enter the cabin of your Nissan Qashqai. Begin by unclipping and removing the cover located at the lower left of the centre tunnel ne…
How to Replace the Cabin Air Filter on a 2012 Nissan Qashqai
How to Replace the Cabin Air Filter on a 2012 Nissan Qashqai
Nissan Qashqai (2006-2014 / J10) Replacing the cabin air filter on a 2012 Nissan Qashqai is a straightforward task. First, open the driver’s door. Second, remove the filter cover usi…
How to Replace the Cabin Air Filter on a Nissan Qashqai 2
How to Replace the Cabin Air Filter on a Nissan Qashqai 2
Nissan Qashqai (2014-2022 / J11) Periodically replacing the cabin air filter in your Nissan Qashqai Mk2 is very important as it ensures optimal air quality, especially when using the…

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos