Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Tailgate Handle on the Nissan Qashqai

Model: Nissan Qashqai J10 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Handle

See other generations:
Video tutorial

In this video, see how to replace the tailgate handle on the Nissan Qashqai: we start from a very compromised situation, as shown in the video. Remove the handle from underneath: the screws are clearly visible and unscrew easily.

You will need to disconnect the electrical connectors for the number plate light. An accurate cleaning of the plastic parts will be essential, where you will apply the new parts that support the internal screws; after gluing them, allow them to dry thoroughly under pressure.

Once dry, reinsert the screws, reconnect the electrical parts, and from inside, tighten the screws securely.


Updated on 9 September 2026 by ScegliAuto


Related tutorials

Removing the Rear Tailgate Handle on Nissan Qashqai 1
Removing the Rear Tailgate Handle on Nissan Qashqai 1
Nissan Qashqai (2006-2014 / J10) In this video tutorial, you will learn how to remove the tailgate opening handle on a first-generation Nissan Qashqai. First, open the boot and remov…
Disassembly of the handle and trunk opening button of the Nissan Qashqai.
Disassembly of the handle and trunk opening button of the Nissan Qashqai.
Nissan Qashqai (2014-2022 / J11) The instructions in this guide will show us how to disassemble and replace the handle and opening button of the rear tailgate of the Nissan Qashqai. …
How to Remove the Tailgate Handle on a Nissan Qashqai
How to Remove the Tailgate Handle on a Nissan Qashqai
Nissan Qashqai (2006-2014 / J10) Follow these steps to remove the tailgate handle on a Nissan Qashqai to replace the number plate bulbs. First, open the rear tailgate of the car, the…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos