Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Remote Control Battery on the Nissan Qashqai

Model: Nissan Qashqai J12 - Years: 2021, 2022, 2023, 2024, 2025, 2026
Part: Key

See other generations:
Video tutorial

In this video, you will see that when the battery powering the Intelligent Key of the Nissan Qashqai runs out, you need to replace it. To do this, press the small button on the opposite side of the buttons to release the key blade from its housing. Use a small screwdriver to separate the two halves by inserting the blade into the groove along the edge; in one of the halves, you will find the battery compartment.

Using the screwdriver, remove the old battery and replace it with a new one, ensuring correct positioning. Reassemble the two halves and press to lock them, then insert the key blade back into its housing.


Updated on 10 September 2026 by ScegliAuto


Related tutorials

Replacing the Key Fob Battery for the Nissan Qashqai
Replacing the Key Fob Battery for the Nissan Qashqai
Nissan Qashqai (2006-2014 / J10) In this guide, you will see the procedure needed to disassemble and replace the battery in the key fob for the Nissan Qashqai, in simple and quick st…
Replacing the Key Fob Battery of the Nissan Qashqai
Replacing the Key Fob Battery of the Nissan Qashqai
Nissan Qashqai (2014-2022 / J11) Here are the steps and instructions that will allow you to disassemble and replace the battery of the key fob for the Nissan Qashqai. First, take you…
How to Replace the Car Remote Battery on a Nissan Qashqai
How to Replace the Car Remote Battery on a Nissan Qashqai
Nissan Qashqai (2006-2014 / J10) Today, we will explain how to independently replace the car remote battery on a Nissan Qashqai model J10 in just a few minutes. To perform the replac…

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos