Do it yourself
Frequently asked questions about cars and motorcycles

How to Reset the Service Reminder on a Nissan Note

Model: Nissan Note E11, MK 1 - Years 2004-2013
Part: Warning light – error code

To reset the service reminder on a Nissan Note, follow these general steps: Sit in the driver's seat and ensure all doors are closed. Insert the key into the ignition and turn it to the "ON" position. Do not start the engine. Locate the trip meter reset button, which is usually found on the instrument cluster. Press and hold the trip meter reset button while turning the ignition key to the "OFF" position. While still holding the trip meter reset button, turn the ignition key back to the "ON" position. Continue holding the trip meter reset button for about 10 seconds until the maintenance light starts flashing or the display shows that the reset procedure is complete. The exact method may vary depending on the model year and version of the Nissan Note. Release the trip meter reset button. Turn the ignition key to the "OFF" position and remove it from the ignition. Start the engine to ensure that the service reminder has been reset.

Updated on 10 September 2026 by ScegliAuto

Video tutorial

Related tutorials

Nissan Note (2004-2013 / E11, MK 1) To carry out the manual reset of the service light of your 2011 Nissan Note, all you have to do is follow the steps described in our new guide. First…
Nissan Note (2012-2022 / MK 2, E12) To reset the Service light on a Nissan Note, turn on the ignition by inserting the key into the ignition switch. Once the dashboard is lit, press and…
Nissan Note (2012-2022 / MK 2, E12) To reset the Service light on the Nissan Note, press and hold the buttons located on the sides of the instrument cluster while it is off. Continue ho…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos