Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a Nissan Tiida

Model: Nissan Tiida Versa C12 - Years 2011-2018
Part: Service warning light

In this video, you can see how to reset the service light on a Nissan Tiida: close all the doors and turn on the ignition. Press the button/dial located under the speedometer: a service number will flash on the display for a few seconds while you continue to hold the button for at least fifteen seconds. Then, start pressing it quickly: other service numbers will appear, which should not alarm you. When the number ten thousand appears at the top, you can release the button. The display will show the word "good" and when you restart the vehicle, the light will be off.

Updated on 14 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on a Nissan Tiida
How to Reset the Service Light on a Nissan Tiida
Nissan Tiida Versa (2011-2018 / C12) .. In this video, you will learn how to reset the service light on a Nissan Tiida Versa. First, turn on the ignition without starting.. …
How to Reset the Maintenance Light on a Nissan Tiida Versa
How to Reset the Maintenance Light on a Nissan Tiida Versa
Nissan Tiida Versa (2011-2018 / C12) In this video tutorial, the steps to reset the maintenance light on a Nissan Tiida Versa are shown. The procedure is always fairly quick. First, get …
How to Reset the Service Light on a Nissan Tiida?
How to Reset the Service Light on a Nissan Tiida?
Nissan Tiida Versa (2004-2011 / C11) As shown in this tutorial, resetting the service light on a Nissan Tiida is an extremely simple and quick operation. Before proceeding, make sure you…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos