Do it yourself
Frequently asked questions about cars and motorcycles

How to reset the airbag warning light on the Nissan Qashqai?

Model: Nissan Qashqai J10 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Warning light – error code

See other generations:
Video tutorial

When the airbag warning light appears on the dashboard of the Nissan Qashqai, it indicates a generic problem with the airbag system: the light often illuminates due to an electronic fault related to the light switch. To resolve the issue, remove the airbag located at the centre of the steering wheel by unscrewing the screws at the back; then loosen the screws securing the steering wheel and remove it to access the light switch at the back.

These can now be replaced, then connect a scanner to the OBD port and reset the errors stored in the unit.


Updated on 17 September 2026 by ScegliAuto


Related tutorials

Nissan Qashqai (2006-2014 / J10) In this video tutorial, you will see how to reset the airbag light on the Nissan Qashqai from 2006 to 2014. First, get into the vehicle and insert th…
Nissan Qashqai (2006-2014 / J10) Today's instructions will allow us to reset the airbag malfunction warning light on the Nissan Qashqai in a few simple steps. First, it is necessary …
Nissan Qashqai (2014-2022 / J11) Before you begin, enter the cabin of your Nissan Qashqai, specifically the driver's seat. Start by inserting the key into the ignition barrel and tur…

Other guides you may be interested in

    Frequently Asked Questions

    • Qashqai 2014-2022 - What does it mean when the "chassis control system error" indication lights up on the Nissan Qashqai? Read answer
    • Qashqai 2014-2022 - What does the yellow brake warning light on the Nissan Qashqai mean? Read answer
    • Qashqai 2014-2022 - Why is the Nissan Qashqai handbrake warning light flashing? Read answer
    • Qashqai 2014-2022 - What does the red engine light on the Nissan Qashqai mean? Read answer

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos