Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Nissan
    3. :
  3. X Trail
    4. : Diagram and location of the internal fuses of the Nissan X-Trail

Nissan X Trail - Video tutorial

Model: Nissan X Trail MK 3, T32 - Years 2014-2023
Part: Fuse box
Operation: Diagram and location of the internal fuses of the Nissan X-Trail

In this guide, we will see the layout and positioning of the internal fuses of the Nissan X-Trail, following the instructions below. First of all, we get on board the car and start by opening the glove compartment; we release it until it comes off and remove it, thus accessing the internal fuse box. At this point, we remove the plastic cover to access it, using the fuse diagram found in the vehicle's owner's manual; on it, we find the fuse layout and diagram, useful for identifying the codes and amperages.


Posted on 31 March 2024 by ScegliAuto

    Frequently Asked Questions

    • X Trail 2014-2023 - Where is the fuse for the Nissan X-Trail cigarette lighter located? Read Answer
    • X Trail 2001-2006 - Where is the air conditioning fuse on the Nissan X-Trail located? Read Answer
    • X Trail 2001-2006 - Where are the fuses on the Nissan X-Trail located? Read Answer
    • X Trail 2014-2023 - Where is the Nissan X-Trail cabin blower fuse located? Read Answer
    • X Trail 2007-2014 - Where are the fuses located in the Nissan X-Trail? Read Answer
    • X Trail 2001-2006 - Where are the fuses for the exterior lights of the Nissan X-Trail T30? Read Answer
    • X Trail 2014-2023 - Where is the Nissan X Trail brake fuse located? Read Answer
    • X Trail 2007-2014 - Where are the fuses of the Nissan X-trail located? Read Answer

How to reset the TPMS light of the Volkswagen Polo 2011

The orange tire light indicates the presence of one or more tires with an inflation pressure below the recommended limit. All this is easily solved by inflating them correctly or replacing them in the event of a puncture. After carrying out these operations it is necessary to reset the warning light and therefore also the sensor in order to have new reading data. All you have to do is start the car ignition and then fully open the glove compartment on the passenger side. Locate the two buttons in the right corner and press "Set". At this point the reset is complete and you can turn off the ignition.

Watch the video!


by ScegliAuto

More videos