Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Car Radio and Dashboard

Model: Nissan 350z MK 1 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Car stereo

Video tutorial

Due to the delicate nature of this task, it is recommended to carry out the operation if you have some experience. Remove the gear lever cover and the associated plastic panel by prising at the edges with a plastic tool.

Disconnect the wiring of the switches and pull it away from the gear lever. Unscrew the screws of the control unit and remove it. Unscrew all the screws of the car radio fascia.

Gently remove the fascia by prising at all sides, then also remove the complete dashboard by carefully extracting it from its housing. Disconnect all wiring at the back until it is completely removed.


Updated on 2 February 2026 by ScegliAuto


Related tutorials

How to Reset the Airbag Warning Light
How to Reset the Airbag Warning Light
Nissan 350z (2002-2009 / MK 1) If there is a fault in the airbag system, the airbag warning light remains illuminated for seven seconds when the ignition is turned on, then it turn…
Intake Manifold Removal
Intake Manifold Removal
Nissan 350z (2002-2009 / MK 1) The intake manifold consists essentially of the aluminium cover located right at the top of the engine; start by disconnecting the hose connected to …
Instructions for Removing Engine Cover
Instructions for Removing Engine Cover
Nissan 350z (2002-2009 / MK 1) On almost all car models, a plastic protection cover is applied over the engine, giving the engine bay a tidier appearance and often serving a sound-…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos