Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the OBD2 port located on the Nissan Qashqai?

Model: Nissan Qashqai J10 - Years 2006-2014
Part: Dashboard

To locate the OBD2 port inside your Nissan Qashqai, simply follow the following procedure. First of all, you need to enter the interior of the car and make sure that your Nissan Qashqai is completely turned off, then shift your attention to the lower part of the dashboard. Next, locate the small compartment and remove the cover with your own hands. Finally, locate the OBD2 port you were looking for, easily distinguishable thanks to its white color. From now on, you can finally connect any compatible diagnostic tool to it.

Posted on 14 July 2024 by ScegliAuto

Video tutorial

Related tutorials

Where is the OBD port of the Nissan Qashqai J10 located?
Where is the OBD port of the Nissan Qashqai J10 located?
Nissan Qashqai (2006-2014 / J10) If you don't know where the OBD port of your Nissan Qashqai J10 is located, don't worry because thanks to the steps described in the following guide,…
Where is the OBD port on the Nissan Qashqai J11
Nissan Qashqai (2014-2022 / J11) Below we will find out together where the OBD port of your Nissan Qashqai J11 (year 2014-2022) is located. Thanks to it you can connect any compatibl…
Where is the OBD port located on the 2013 Nissan Qashqai?
Where is the OBD port located on the 2013 Nissan Qashqai?
Nissan Qashqai (2006-2014 / J10) In this new guide dedicated to your 2013 Nissan Qashqai J10, we will discover how to quickly locate the OBD port of the car. Thanks to it, you will f…

Installation of Upgraded Intercooler Radiator with Pipes

Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille.

Watch the video!


by ScegliAuto

More videos