Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Shift Knob of the 2010 Nissan Sentra

Model: Nissan Sentra MK 6, B16 - Years: 2007, 2008, 2009, 2010, 2011, 2012
Part: Shift knob

See other generations:
Video tutorial

Removing the shift knob in your 2010 Nissan Sentra is very simple. By following the steps described below, you can complete the operation safely and without any difficulty.

First, make sure you have a flathead screwdriver and a small pair of pliers. Then, go inside the cabin and remove the plastic piece located at the bottom of the knob with the screwdriver.

Once done, break the safety clip with the pliers and pull the knob upward to remove it completely.


Updated on 12 October 2026 by ScegliAuto


Related tutorials

How to Reset the Automatic Transmission of the Nissan Sentra
How to Reset the Automatic Transmission of the Nissan Sentra
Nissan Sentra (2012-2022 / B17, MK 7) Resetting the automatic transmission of the Nissan Sentra is a simple operation that you can easily perform on your own. Start the reset by turning o…
Where to Find the Cabin Fuse Box on a 2013 Nissan Sentra
Nissan Sentra (2012-2022 / B17, MK 7) To easily and safely locate the cabin fuse box on your 2013 Nissan Sentra, follow these steps. First, open the driver's side door and remove the plas…
How to Replace the Alternator on a Nissan Sentra
How to Replace the Alternator on a Nissan Sentra
Nissan Sentra (2007-2012 / MK 6, B16) Today's instructions will show you how to remove and replace the alternator on a Nissan Sentra by following these simple steps. First, lift the vehic…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos