Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the license plate light of the Opel Meriva B

Model: Vauxhall Meriva Meriva B, MK 2 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: License plate light

See other generations:
Video tutorial

In the following guide, we will discover together the various steps that you need to apply if you want to replace the license plate light of your Opel Meriva B quickly and safely. Additionally, any malfunction of the license plate light is indicated by the appearance of error code number 24 on the instrument panel display.

First, purchase a new bulb that is perfectly compatible, then equip yourself with a flathead screwdriver and use it to remove the license plate light fixture. To facilitate the operation, you can raise the rear hood.

Once the fixture is removed, proceed with replacing the bulb.


Posted on 17 December 2024 by ScegliAuto


Related tutorials

How to Replace the Number Plate Bulb of the Opel Meriva?
How to Replace the Number Plate Bulb of the Opel Meriva?
Vauxhall Meriva (2003-2010 / Meriva A, MK 1) To replace the number plate bulb of the Opel Meriva, use a screwdriver to pry at the side of the corresponding ceiling light: when the ceiling light …
Replacing the Rear Light Bulb on the Opel Meriva
Replacing the Rear Light Bulb on the Opel Meriva
Vauxhall Meriva (2003-2010 / Meriva A, MK 1) If you notice that the position light bulb on the Opel Meriva has blown, replace it as soon as possible. Open the boot lid, position yourself in fron…
How to replace the license plate bulb of the Opel Meriva A.
How to replace the license plate bulb of the Opel Meriva A.
Vauxhall Meriva (2003-2010 / Meriva A, MK 1) Let's see how to replace the license plate bulb on the Opel Meriva A: open the rear hood and remove the screws that hold the ceiling light located ab…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos