Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to change the battery of an Opel Combo remote control

Model: Vauxhall Combo MK 3, Combo C - Years: 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011
Part: Key

See other generations:
Video tutorial

Through this very short tutorial today you will be able to see the necessary procedure to replace the battery of the remote control of a third series Opel Combo. Let's start the procedure immediately by inserting a small flathead screwdriver into the bottom of the key and then applying some pressure to separate the key into two halves as shown in the video.

Once this is done, we can immediately remove the old battery and insert a new one, being careful to insert it in the right direction, finally we close everything following the reverse procedure. The battery needed for this type of key is the CR2032 3V.


Posted on 19 December 2024 by ScegliAuto


Related tutorials

Resetting the Service Light on the Opel Combo
Resetting the Service Light on the Opel Combo
Vauxhall Combo (2019-2026 / Combo E, MK 5) When it is time for an oil change on the Opel Combo, a warning appears on the instrument cluster. After completing this operation, you need to reset …
How to enable and disable cruise control on the Opel Combo E
How to enable and disable cruise control on the Opel Combo E
Vauxhall Combo (2019-2026 / Combo E, MK 5) In this video we can see how to use the cruise control on the Opel Combo E: we will use the control panel located on the left side of the steering wh…
Where is the fuse box of the Opel Combo located?
Where is the fuse box of the Opel Combo located?
Vauxhall Combo (2001-2011 / MK 3, Combo C) Finding the fuse box inside your Opel Combo is really simple. To do so, just follow these steps. First of all, park the vehicle safely, then turn it …

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos