Do it yourself
Frequently asked questions about cars and motorcycles

How to install a rearview camera on an Opel/Vauxhall Movano

Model: Vauxhall Movano MK 3 - Years 2021-2026
Part: Checks and maintenance

In this video, we see how to add a camera to an Opel/Vauxhall Movano van (but also to a Nissan NV400). We can find these cameras, which replace the third rear brake light, for example on Amazon, with the code B07DHV7YNB at a price of 129.99 euros + 4.99 euros for shipping. We can also thread the camera wire through the rubber frame, threading a long copper ring, and hooking the end of the serrated cable through the ring, then cover it with tape: add a drop of lithium grease and pull it through. The main frame passes through the rear doors to the passenger side and runs inside the rear guide to the front, where the camera wire also passes. We slightly push the headliner and the camera cable enters the cabin, passing under the rubber seal above the door. We bring it to the fuse box and to the area of the pocket above the radio, where we mount the monitor. Here we will make all the connections.

Posted on 20 January 2025 by ScegliAuto

Video tutorial

Related tutorials

Vauxhall Movano (2010-2021 / MK 2, Movano B) Good morning, today we will dedicate ourselves to resetting the "Service" light on our Opel Movano. Before proceeding, we will need to make sure that…
Vauxhall Movano (1998-2011 / Movano A, MK 1) It will be possible to adjust the clock shown on the instrument panel of the Opel Movano by inserting the ignition key into the corresponding slot: o…
Vauxhall Movano (2010-2021 / MK 2, Movano B) In this video we can see where the battery of the Opel/Vauxhall Movano (but also of the Nissan NV400) is located. It is actually located inside the t…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos