Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Dismantle the Ignition Switch on an Opel Corsa

Model: Vauxhall Corsa Corsa C - Years: 2000, 2001, 2002, 2003, 2004, 2005, 2006
Part: Door lock

See other generations:
Video tutorial

How to dismantle the ignition switch on an Opel Corsa? Follow these steps: before dismantling the ignition switch of the vehicle, disconnect the battery power cables. Unscrew the securing screws of the side and lower trim of the steering wheel with a socket or screwdriver, then remove the screws present also with a screwdriver.

Once the plastics are removed, dismantle the securing pin of the ignition switch. After extracting the lock, replace it with a new one. Proceed in reverse order for the assembly operations.


Updated on 2 March 2026 by ScegliAuto


Related tutorials

How to Remove the Ignition Switch on an Opel Corsa
How to Remove the Ignition Switch on an Opel Corsa
Vauxhall Corsa (2000-2006 / Corsa C) How to remove the ignition switch on an Opel Astra? In this video, see how to proceed: before removing the ignition switch, disconnect the battery po…
How to Remove the Ignition Switch on the Opel Corsa?
How to Remove the Ignition Switch on the Opel Corsa?
Vauxhall Corsa (1993-2000 / Corsa B) In this tutorial, you will see how to remove the ignition switch on the Opel Corsa B. First, remove the lower cover of the steering column by unscrew…
How to Remove the Ignition Barrel from an Opel Corsa?
How to Remove the Ignition Barrel from an Opel Corsa?
Vauxhall Corsa (2000-2006 / Corsa C) To replace the ignition barrel on an Opel Corsa, you need to unclip the fastening clips of the plastic covers on the steering column, located at the …

Other guides you may be interested in

How to Reset the Tyre Light on a Toyota Aygo?

To reset the tyre light on a Toyota Aygo, start by locating the reset button, which is found in the glove compartment of the front passenger side. Turn on the car and ensure that the tyres are at the correct pressure. Then, press and hold the reset button for a few seconds until the tyre light either flashes or turns off, depending on the model. Release the button and wait for the reset procedure to complete. Restart your Toyota Aygo and check if the tyre light has turned off, indicating that the reset was successful.

Watch the video!


by ScegliAuto

More videos