Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the service light on the Opel Corsa

Model: Vauxhall Corsa Corsa D - Years 2006-2014
Part: Service warning light

When the Insp0 warning light comes on in an Opel Corsa model D, it means that the engine oil needs to be replaced because it is burnt. To reset the oil warning light, after performing the required maintenance, you will need to press the button located to the right of the instrument panel while turning on the instrument panel. Immediately after, you will need to turn off and hold down the button until the vehicle is completely reset, and then turn on the instrument panel again. If the warning light does not reset, you can request a computerized diagnosis at the workshop.

Posted on 22 March 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on the Opel Corsa D 1.3 CDTI
How to Reset the Service Light on the Opel Corsa D 1.3 CDTI
Vauxhall Corsa (2006-2014 / Corsa D) In this short guide, you will learn how to reset the service light for the regular maintenance oil change on the Opel Corsa D 1.3 CDTI in simple step…
How to reset the engine oil service light on the Opel Corsa
How to reset the engine oil service light on the Opel Corsa
Vauxhall Corsa (2014-2019 / Corsa E) After performing the routine maintenance check, it is necessary to reset the service light; let's see how to reset the warning on the Opel Corsa. Fir…
How to Reset the Service Light on an Opel Corsa D
How to Reset the Service Light on an Opel Corsa D
Vauxhall Corsa (2006-2014 / Corsa D) This video tutorial shows the procedure to reset the service light on an Opel Corsa D. This procedure is very simple and quick, requiring no special …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos