Do it yourself
Frequently asked questions about cars and motorcycles

How do you replace the windshield washer pump on a 2006 OPEL VIVARO A Van?

Model: Vauxhall Vivaro MK 1 - Years 2001-2014
Part: Windshield wipers

Stay calm because changing the windshield washer pump on your Opel Vivaro A is not complicated but it requires a bit of patience. Disconnect the battery for safety, then you need to find the pump, it is attached to the windshield washer fluid tank usually near the front wheel arch. Remove the wheel arch or the protection under the bumper to reach it better. Then disconnect the electrical connector and the hoses, be careful as you may lose some water. The pump should come off by pulling or slightly rotating it. Take the new one, insert it properly, reconnect everything and reassemble the removed parts. Fill the tank, try to make it work and, if everything goes well, you have done a great job. If you don't feel comfortable doing it yourself, contact a trusted workshop.

Posted on 31 March 2025 by ScegliAuto

Video tutorial

Related tutorials

Vauxhall Vivaro (2001-2014 / MK 1) The timing belt installed on the Opel Vivaro engine can be replaced by lifting the vehicle using a jack: at this point, it will be possible to loosen…
Vauxhall Vivaro (2014-2019 / MK 2) In this tutorial we can see how to adjust the time in the Opel Vivaro van, an extremely simple and quick operation, to be carried out for example aft…
Vauxhall Vivaro (2001-2014 / MK 1) In this tutorial we can see how to enter the unlock code for the radio in the Opel Vivaro van, a very simple and quick operation, to be carried out f…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos