Do it yourself
Frequently asked questions about cars and motorcycles

How to Remove the Clutch Pump from an Opel Vivaro

Model: Vauxhall Vivaro MK 1 - Years: 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Pump

See other generations:
Video tutorial

Before starting, enter the cabin of your Opel Vivaro. Begin by removing the cover located between the clutch pedal and the pump.

Next, disconnect the hoses attached to the pump by loosening the relevant clamps. Once this step is complete, unscrew and remove the bolts securing the pump, then take out the pump.

After removing the pump, you will have finished disassembling the clutch pump from your Opel Vivaro, and you will be free to install the new pump.


Updated on 4 April 2026 by ScegliAuto


Related tutorials

Vauxhall Vivaro (2001-2014 / MK 1) How to remove the car radio from an Opel Vivaro? Let’s carefully see how to carry out the removal: use the original or aftermarket metal keys to remo…
Vauxhall Vivaro (2014-2019 / MK 2) Like most car and van models, replacing the diesel filter on the Opel Vivaro is a fairly simple task. Locate the compartment containing it (see video…
Vauxhall Vivaro (2019-2026 / MK 3, Vivaro C) You can clear the AdBlue warning light on the Opel Vivaro by topping up the necessary amount of additive liquid: to do this, open the fuel flap and l…

How to Reset the Tyre Light on a Toyota Aygo?

To reset the tyre light on a Toyota Aygo, start by locating the reset button, which is found in the glove compartment of the front passenger side. Turn on the car and ensure that the tyres are at the correct pressure. Then, press and hold the reset button for a few seconds until the tyre light either flashes or turns off, depending on the model. Release the button and wait for the reset procedure to complete. Restart your Toyota Aygo and check if the tyre light has turned off, indicating that the reset was successful.

Watch the video!


by ScegliAuto

More videos