Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Clutch on the Opel Zafira 1.6L

Model: Vauxhall Zafira Zafira B, A05, MK 2 - Years 2005-2011
Part: Clutch

This guide provides instructions on how to remove and replace the clutch on the Opel Zafira 1.6L. First, lift the vehicle and start by removing the wheels, disconnecting the front driveshafts by unscrewing the securing bolts; then disconnect the engine mount and unscrew the screws of the gearbox, as shown in the video. Using a jack, lower the gearbox to access the clutch kit; replace and install the new clutch, also replacing the flywheel if necessary, following the video tutorial to the end.

Posted on 9 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Clutch Cylinder on the Opel Zafira?
How to Replace the Clutch Cylinder on the Opel Zafira?
Vauxhall Zafira (2005-2011 / Zafira B, A05, MK 2) To replace the clutch cylinder on the Opel Zafira, open the bonnet to locate the component at the rear of the engine bay, near the pedal assembly. On…
How to Replace the Clutch on the Opel Zafira B?
How to Replace the Clutch on the Opel Zafira B?
Vauxhall Zafira (2005-2011 / Zafira B, A05, MK 2) To replace the clutch on the Opel Zafira B, lift the car with a ramp or jack and remove the left front wheel. Once removed, open the bonnet and acces…
How to start a Opel Zafira?
How to start a Opel Zafira?
Vauxhall Zafira (2005-2011 / Zafira B, A05, MK 2) To start a Opel Zafira, you need to follow some simple steps. First of all, make sure the vehicle is in a parked position. Insert the key into the ig…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos