Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Clutch on the Opel Zafira B?

Model: Vauxhall Zafira MK 2, A05, Zafira B - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011
Part: Clutch

See other generations:
Video tutorial

To replace the clutch on the Opel Zafira B, lift the car with a ramp or jack and remove the left front wheel. Once removed, open the bonnet and access the engine compartment by removing some obstructing parts located to the right of the engine block, such as the air filter box. After these have been removed, unscrew the bolts securing the clutch from this point.

The other bolts will need to be unscrewed from underneath the car. Once the clutch is freed, it can be extracted from its housing and replaced.


Updated on 30 May 2026 by ScegliAuto


Related tutorials

How to Replace the Clutch Cylinder on the Opel Zafira?
How to Replace the Clutch Cylinder on the Opel Zafira?
Vauxhall Zafira (2005-2011 / MK 2, A05, Zafira B) To replace the clutch cylinder on the Opel Zafira, open the bonnet to locate the component at the rear of the engine bay, near the pedal assembly. On…
How to Replace the Clutch on the Opel Zafira 1.6L
How to Replace the Clutch on the Opel Zafira 1.6L
Vauxhall Zafira (2005-2011 / MK 2, A05, Zafira B) This guide provides instructions on how to remove and replace the clutch on the Opel Zafira 1.6L. First, lift the vehicle and start by removing the w…
How to start a Opel Zafira?
How to start a Opel Zafira?
Vauxhall Zafira (2005-2011 / MK 2, A05, Zafira B) To start a Opel Zafira, you need to follow some simple steps. First of all, make sure the vehicle is in a parked position. Insert the key into the ig…

Other guides you may be interested in

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos