Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Diesel Filter Replacement on Opel Vivaro

Model: Vauxhall Vivaro MK 2 - Years 2014-2019
Part: Diesel fuel filter

Like most car and van models, replacing the diesel filter on the Opel Vivaro is a fairly simple task. Locate the compartment containing it (see video), and you will notice it is connected to another container resembling a "pump": simply disconnect the hose joining the two containers. After that, you can replace the filter without completely removing the casing from the vehicle: to do this, unscrew the long screw holding the diesel filter cover, to which the inlet and outlet are connected. Remove the filter and insert a new one, then change the O-ring and reassemble everything.

Updated on 4 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Guide to Replacing the Timing Belt on the Opel Vivaro
Vauxhall Vivaro (2001-2014 / MK 1) This guide provides instructions on how to replace the timing belt on the Opel Vivaro, as well as the Renault Trafic. First, open the bonnet and star…
Where to Find the Fuse Box on an Opel Vivaro B
Where to Find the Fuse Box on an Opel Vivaro B
Vauxhall Vivaro (2014-2019 / MK 2) If you experience issues with one or more electrical components in your Opel Vivaro B, you can target the respective fuses. In this guide, you will l…
Where are the fuses located on the Opel Vivaro?
Where are the fuses located on the Opel Vivaro?
Vauxhall Vivaro (2019-2026 / Vivaro C, MK 3) On the Opel Vivaro, you can find all the fuses divided within the appropriate fuse boxes installed in the vehicle: in this type of car, there are two…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos