Do it yourself
Frequently asked questions about cars and motorcycles

How to reset the service light on the 2019 Opel Astra

Model: Vauxhall Astra Astra K - Years: 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022
Part: Service warning light

Video tutorial

To reset the service light on a 2019 Opel Astra vehicle, we need to turn on the instrument panel and press the injection start button, located behind the steering wheel. While holding down the button, press the brake pedal; when the message "reset start" appears on the instrument panel display, release the button and press the accelerator pedal three times in a row while still holding down the brake pedal.

After a few seconds, the message "reset completed" will appear on the instrument panel display, so release the brake pedal and restart the instrument panel. If the service light for the car maintenance is still flashing when the instrument panel is turned on, it is necessary to go to a workshop to perform a computerized diagnosis, as the oil change sensors may not be functioning properly or there may be an error in the control unit.


Posted on 23 April 2025 by ScegliAuto


Related tutorials

Vauxhall Astra (2015-2022 / Astra K) Today we will explain how to reset the service light, related to the car maintenance, on the Opel Astra model K from 2017/2018. To reset the service …
Vauxhall Astra (2021-2026 / Astra L) Today we will explain how to reset the service light on the Opel Astra L. To reset the light, we need to turn on the instrument panel and press the b…
Vauxhall Astra (2015-2022 / Astra K) Today, we will explain how to reset the service light related to the car service on an Opel Astra model K, produced from 2015 to 2022. To reset the l…

Other guides you may be interested in

How to Remove the Rear Bumper on a Peugeot 308

This article outlines the procedure to remove and replace the rear bumper on a Peugeot 308 T9. First, remove the screws located in the wheel arch of the rear wheels, then remove the plastic clips underneath the bumper. Next, take off the wheel arch cover, and remove the plastic nut. After removing the nut, disconnect the connectors present. Now, remove the fixing screws located underneath the bumper and also the plastic clips. Once all clips and screws are removed, you can take off the bumper for repair or replacement.

Watch the video!


by ScegliAuto

More videos