Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the OBD2 port located on the Opel Meriva 2011?

Model: Vauxhall Meriva Meriva B, MK 2 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Checks and maintenance

See other generations:
Video tutorial

If you do not know where the OBD2 port is located inside your second generation Opel Meriva (2011), do not worry because you just need to read the following guide to complete the search without any difficulty and in total safety. First of all, turn off the car if you have not already done so, then focus on the armrest located below the gear lever and lift it completely.

Once you have done this, remove the plastic protective cover and locate the OBD2 port you were looking for. Then reposition the armrest correctly and you are done.


Posted on 30 April 2025 by ScegliAuto


Related tutorials

Where is the OBD2 Port on the Opel Meriva A?
Where is the OBD2 Port on the Opel Meriva A?
Vauxhall Meriva (2003-2010 / Meriva A, MK 1) Knowing the location of the OBD2 port on your Opel Meriva A is very important as it allows you to connect any compatible diagnostic tool to identify …
Where is the OBD socket and fuse box of the Opel Meriva?
Where is the OBD socket and fuse box of the Opel Meriva?
Vauxhall Meriva (2010-2017 / Meriva B, MK 2) The OBD port on an Opel Meriva model B is located inside the cabin, specifically under a cover for the handbrake. To access the socket, remove the co…
Where is the OBD port located in the Opel Meriva B?
Where is the OBD port located in the Opel Meriva B?
Vauxhall Meriva (2010-2017 / Meriva B, MK 2) The Opel Meriva B was produced and sold between 2010 and 2017, as the successor to the Opel Meriva A. Although it is not a recent vehicle, many users…

    Frequently Asked Questions

    • Meriva 2010-2017 - What problems does the power steering of the Opel Meriva have? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos