Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on an Opel Karl

Model: Vauxhall Karl MK 1 - Years: 2015, 2016, 2017, 2018, 2019
Part: Service warning light

Video tutorial

To reset the service light on the new Opel Karl, turn on the ignition. Now press the tip of the lever located to the left of the steering wheel until the "Vehicle information menu" appears on the display.

At this point, rotate the dial immediately next to the lever button (as shown in the images) until the "Remaining oil life" message appears on the display. Now press and hold the button located at the tip of the lever while simultaneously pressing the brake pedal.

Hold both for a few seconds. Turn off the ignition.

Job done!


Updated on 3 March 2026 by ScegliAuto


Related tutorials

Resetting the Service Light on an Opel Karl
Resetting the Service Light on an Opel Karl
Vauxhall Karl (2015-2019 / MK 1) In this video tutorial, you will learn how to reset the service light for routine maintenance on an Opel Karl. First, get in the car and turn the key…
How to Reset the Service Light on the Opel Karl
How to Reset the Service Light on the Opel Karl
Vauxhall Karl (2015-2019 / MK 1) Below are the instructions that will allow you to reset the engine oil light on the Opel Karl. First, get in the vehicle and start the ignition; then…
How to Reset the Service Light on an Opel Karl
How to Reset the Service Light on an Opel Karl
Vauxhall Karl (2015-2019 / MK 1) To reset the service light on an Opel Karl, it is essential that all necessary servicing operations have been completed at a workshop for the vehicle…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos