Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the diesel filter on an Opel Mokka

Model: Vauxhall Mokka Mokka A - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Diesel fuel filter

See other generations:
Video tutorial

In this video we see how to replace the diesel filter on an Opel Mokka: it is located near the left rear wheel and to do this operation we need to lift the vehicle, at least in its rear part. We find it immediately because it is a very visible component.

First, we unscrew the screw in the center, then let the diesel flow into a basin, which we can then recover, and remove the filter to replace the filter and the gaskets inside the container, reassemble everything, turn on the ignition and turn it on two or three times, until the pump has charged.

Always check for leaks to ensure that the installation has been done correctly.


Posted on 1 June 2025 by ScegliAuto


Related tutorials

How to replace the dipped beam bulb on Opel Mokka MK1
How to replace the dipped beam bulb on Opel Mokka MK1
Vauxhall Mokka (2012-2019 / Mokka A) In this video, we will see how to replace the low beam headlight bulb on an Opel Mokka MK1: we open the front hood; we have enough space to reach beh…
What Does the "MIL" Light Mean on an Opel Mokka?
What Does the "MIL" Light Mean on an Opel Mokka?
Vauxhall Mokka (2012-2019 / Mokka A) When the "MIL" (Malfunction Indicator Lamp) light activates on the dashboard of your Opel Mokka, it indicates a general malfunction with the emission…
How to replace the handbrake button on an Opel Mokka
How to replace the handbrake button on an Opel Mokka
Vauxhall Mokka (2012-2019 / Mokka A) Thanks to this very short and useful video guide today, you will be able to see in a few simple steps how to replace the handbrake lever button on an…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos