Do it yourself
Frequently asked questions about cars and motorcycles

Replacing the Engine Speed Sensor

Model: Vauxhall Corsa Corsa D - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Crankshaft position sensor

See other generations:
Video tutorial

A malfunctioning engine speed sensor can cause the engine to stall (especially at low revs) with difficulty restarting immediately after stalling; it generally restarts after the engine has cooled down a bit and is often confused with a fuel pump malfunction.

In any case, the fault is diagnosable via OBD, and the fault code description specifically states "engine speed sensor". It is a spare part that is easily available in the aftermarket and is located on the gearbox, between the driveshaft and the starter motor.

To replace it, simply loosen the corresponding fixing bolt (10 Torx, can also be unscrewed with an 8 mm spanner) and remove it by disconnecting the connector attached to it. Then apply the new sensor (the mounting position is fixed), tighten the fixing bolt, and reconnect the connector.

Check the proper starting of the engine.


Updated on 3 February 2026 by ScegliAuto


Related tutorials

Vauxhall Corsa (2000-2006 / Corsa C) If the crankshaft position sensor is damaged, the engine may not start as the ECU cannot execute the correct injection sequences; additionally, the e…
Vauxhall Corsa (1993-2000 / Corsa B) The crankshaft sensor is an essential component for the proper functioning of the vehicle; it detects the rotation speed of the crankshaft and sends …
Vauxhall Corsa (2006-2014 / Corsa D) Removing the Lambda sensor? Let's see how on the Opel Corsa. Pull the engine compartment release lever located at the bottom left of the dashboard an…

Other guides you may be interested in

    Frequently Asked Questions

    • Corsa 2006-2014 - Where is the Opel Corsa's camshaft sensor located? Read answer
    • Corsa 2006-2014 - Where is the RPM sensor located on the Opel Corsa? Read answer
    • Corsa 2006-2014 - Where is the engine speed sensor located on the Opel Corsa? Read answer

How to Open the Fuel Flap on a Volkswagen Tiguan?

To open the fuel flap on a Volkswagen Tiguan, first unlock the car using the appropriate button on the remote. This will open the car and unlock the mechanism that controls the fuel flap. At this point, apply light pressure to the left side of the flap to open it and access the cap underneath. Once this is unscrewed, you can refuel and then close everything.

Watch the video!


by ScegliAuto

More videos