|
Do it yourself
| |||
| ||||
How to remove water from the rear light of the Opel Zafira
Model: Vauxhall Zafira
Zafira B, A05, MK 2
- Years 2005-2011
In this video, we will see how to remove the water that has accumulated inside the rear light of an Opel Zafira. To remove the rear light assembly, we need to enter the trunk and remove the covers that are located in correspondence with the light, from the inside. On the left side, we will find the fuse box, and on the top we find a small recess, which we can easily remove with one hand. Here we find two white plastic screws: one in this compartment and one inside the fuse box. We unscrew them and the light assembly comes off easily, after removing the electrical connector. To remove the part with the bulbs, we turn it and unscrew the two screws that allow us to remove the white part if we need to change the bulbs. To remove the water from the bottom of the assembly, we take something sharp to unclog the small holes that are in the bottom of the light itself; let it drain and then put it back in place.
Posted on 8 June 2025 by ScegliAuto
Video tutorial
Related tutorials
Vauxhall Zafira
(2005-2011 /
Zafira B, A05, MK 2)
To remove the rear bumper from an Opel Zafira, first open the tailgate to access the components inside the boot: here, detach the side panels near th…
Vauxhall Zafira
(2005-2011 /
Zafira B, A05, MK 2)
To remove the rear bumper of an Opel Zafira, start by opening the rear hatch of the trunk. Then, locate and remove the screws and bolts positioned al…
Vauxhall Zafira
(2005-2011 /
Zafira B, A05, MK 2)
Before you start, open the tailgate of the boot on your Opel Zafira. Begin by unscrewing and removing the fixing screws of the rear bumper, located a…
Other guides you may be interested in
|
How to Check the Oil Level on a Jeep Renegade?
To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.128
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |