Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Disassembly of the rear door panel of the Opel Insignia.

Model: Vauxhall Insigna MK 2, Insigna B - Years: 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Door trim panel

See other generations:
Video tutorial

Today's instructions will show us how to disassemble and replace the rear door panel of the Opel Insignia. First, we open the rear door of the car and start unscrewing all the fixing screws of the panel, which are located under the handle and on the opening handle; then we pry on the sides of the panel to detach and remove it, disconnecting the electrical connector of the window button and the handle cable, as shown in the video.

Now we will have access to the internal components of the door, finally reassembling the panel.


Posted on 14 August 2025 by ScegliAuto


Related tutorials

Removing the Door Panel on an Opel Insignia
Removing the Door Panel on an Opel Insignia
Vauxhall Insigna (2008-2017 / MK 1, Insigna A) Now, let's look at removing the left rear door panel on an Opel Insignia. Disconnect the battery terminals located in the engine bay. Using a screwdr…
Removing the Door Panel on an Opel Insignia
Removing the Door Panel on an Opel Insignia
Vauxhall Insigna (2008-2017 / MK 1, Insigna A) In this brief guide, you will learn how to remove and replace the front door panel on an Opel Insignia. First, open the front door and start by remov…
How to Remove the Door Panel on an Opel Insignia
How to Remove the Door Panel on an Opel Insignia
Vauxhall Insigna (2008-2017 / MK 1, Insigna A) Before you begin, open the door of your Opel Insignia. Start by prising off and removing the door inserts with a flathead screwdriver, revealing the …

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos