Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the front headlight bulb of the Opel Corsa

Model: Vauxhall Corsa Corsa E - Years 2014-2019
Part: Headlight bulb

Today we will discover the instructions on how to disassemble and replace the headlight bulb of the Opel Corsa. First, open the hood of the car and start by removing the plastic cover of the bulbs; then disconnect the bulb holder and the electrical connector, thus removing the low beam bulb, as shown in the video. At this point, install the new bulb, of the correct type and with the same attachment; check the functioning of the bulb before reassembling it on the headlight assembly, finally fixing the plastic cover!

Posted on 22 August 2025 by ScegliAuto

Video tutorial

Related tutorials

How to replace the front headlight bulb of the Opel Corsa D
How to replace the front headlight bulb of the Opel Corsa D
Vauxhall Corsa (2006-2014 / Corsa D) To correctly replace the front headlight bulb of your Opel Corsa D, you must follow all the following steps. It is a very simple operation that requi…
How to Replace the Headlamp Bulb on the Opel Corsa E?
How to Replace the Headlamp Bulb on the Opel Corsa E?
Vauxhall Corsa (2014-2019 / Corsa E) To replace the bulb on the Opel Corsa E, open the bonnet to access the internal part of the headlamp corresponding to the bulb to be replaced. Once t…
How to replace the front headlight bulb of the Opel Corsa E 2015
How to replace the front headlight bulb of the Opel Corsa E 2015
Vauxhall Corsa (2014-2019 / Corsa E) If one of the bulbs of the front headlight of your Opel Corsa E (2015) suddenly stops working, you must replace it as soon as possible with a new one…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos