Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to change the drive belt on the Opel Meriva A

Model: Vauxhall Meriva Meriva A, MK 1 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: V-belt

See other generations:
Video tutorial

Let's see how to change the service belt on an Opel Meriva A: first of all, it is advisable to disconnect the negative terminal of the battery to avoid short circuits; lift and support the vehicle, blocking the wheels, and if necessary, remove the wheel and the wheel arch on the side where we need to perform the operation, this will make our work easier.

To remember the belt route well, it is recommended to take a picture of the belt before removing it, in order to reassemble it correctly.

Then loosen the tensioner, which is the component that has a tab with a square hole or a screw for the tool, which we will insert into the hole. Rotate the tool clockwise until we hear the belt click and loosen, and it can be removed.

Replace the tensioner and the pump. We can find all these components on auto-doc. It: the kit with EAN code 4014870164768 at the price of 77.99 + 9.95 euros for shipping.

Install the new belt following the photo, passing the new belt over all the pulleys, except for the tensioner pulley. Tension the belt by rotating the tool in the opposite direction to before (counterclockwise) to tighten the belt, which is correctly tensioned when it is pressed halfway along the longest stretch.

Reassemble all the components, reconnect the battery, start the engine and listen to the engine: there should be no squeaks or abnormal noises.


Posted on 20 November 2025 by ScegliAuto


Related tutorials

How to Replace the Auxiliary Belt on an Opel Meriva B
How to Replace the Auxiliary Belt on an Opel Meriva B
Vauxhall Meriva (2010-2017 / Meriva B, MK 2) In this video, you will see how to replace the auxiliary belt on the Opel Meriva B: first, remove the fasteners of the wheel arch cover on the right …
Where is the OBD port on a 2016 Opel Meriva?
Where is the OBD port on a 2016 Opel Meriva?
Vauxhall Meriva (2010-2017 / Meriva B, MK 2) To easily locate the OBD port inside your second-generation Opel Meriva (2016), follow this guide. First, enter your Opel Meriva and use a flat screw…
How to Reset the Service Light on the Opel Meriva A
How to Reset the Service Light on the Opel Meriva A
Vauxhall Meriva (2003-2010 / Meriva A, MK 1) When the service light on your Opel Meriva A remains on even after servicing the vehicle, you need to manually reset the light. First, get into the c…

Other guides you may be interested in

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos