Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

disassembling the ignition lock Opel astra G

Model: Vauxhall Astra Astra G - Years 1998-2006
Part: Key

In this video we will see how to remove the ignition lock of an Opel Astra. First we disassemble all the plastics that cover the steering and check well because there are several positioned along all sides, after being sure that they have all been removed we extract the plastics releasing the hooks that still keep them attached. Once this is done, we have access to the ignition lock, remove the latches that keep it locked and with the help of a screwdriver we go to lever outwards, we are careful because at the end of the lock there is a small spring, at this point the block has been removed.

Posted on 18 October 2019 by ScegliAuto

Video tutorial

Related tutorials

Removing the EGR valve Opel Astra J 1.7 CDTi
Removing the EGR valve Opel Astra J 1.7 CDTi
Vauxhall Astra (2009-2016 / Astra J) In this video tutorial we will see how to remove the EGR valve of an Opel Astra J 1.7 CDTi. First of all we open the bonnet and we go to identify our…
Removing the ignition lock of an Opel Astra
Removing the ignition lock of an Opel Astra
Vauxhall Astra (1998-2006 / Astra G) Disassembly of the ignition cylinder of an Opel Astra, we see in this video how to proceed. Before disassembling the ignition lock, we disconnect the…
How do you replace the ignition lock on the Opel Astra?
How do you replace the ignition lock on the Opel Astra?
Vauxhall Astra (2004-2010 / Astra H) In order to replace the ignition lock on the Opel Astra, you need to turn the steering wheel first to the right then to the left so that the bolts th…

    Frequently Asked Questions

    • Astra 2004-2010 - Yellow "car with wrench" warning light on Opel Astra h, what does it mean? Read answer

How to Remove the Driver's Door Panel on a Fiat 600

How to remove the driver's door panel on a Fiat 600? This video explains how to proceed. Before starting the disassembly, disconnect the battery terminals located in the engine bay. Use a screwdriver to unscrew the fastening pins on the handle located on the door panel, and unscrew the pins in the plastic of the door opening lever. Remove the handle from the door panel, then use a lever to detach the upper trim panel. Detach the glove compartment panel at the bottom of the door with the lever. Reassemble everything in reverse order.

Watch the video!


by ScegliAuto

More videos