Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Ignition Switch from an Opel Astra

Model: Vauxhall Astra Astra G - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006
Part: Key

See other generations:
Video tutorial

Remove the ignition cylinder from an Opel Astra, here’s how to proceed. Before removing the ignition switch, disconnect the battery power cables.

Unscrew the side and bottom trim screws of the steering wheel using a socket spanner, then remove the trim from the steering column. Once the plastics are removed, take out the ignition switch using a screwdriver and the ignition key. After extracting the ignition switch, prepare for the installation of the new part.

Proceed in reverse order for the installation.


Updated on 27 February 2026 by ScegliAuto


Related tutorials

How to Dismantle the Ignition Key Cylinder of the Opel Astra G Series
How to Dismantle the Ignition Key Cylinder of the Opel Astra G Series
Vauxhall Astra (1998-2006 / Astra G) This guide shows how to dismantle and reassemble the ignition key cylinder of the Opel Astra G series. The first step is to remove the protective cov…
Remove the Mirror on an Opel Astra
Vauxhall Astra (2004-2010 / Astra H) Remove the mirror from the mirror housing? Replace the mirror if it is broken. Pry between the perimeter of the mirror housing and the mirror glass. …
How to Remove the Battery from the Opel Astra J
How to Remove the Battery from the Opel Astra J
Vauxhall Astra (2009-2016 / Astra J) In this mini guide for all Opel Astra J owners, discover the steps to safely and correctly remove the car battery. First, ensure the vehicle is parke…

Other guides you may be interested in

    Frequently Asked Questions

    • Astra 2004-2010 - Yellow "car with wrench" warning light on Opel Astra h, what does it mean? Read answer

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos