Do it yourself
Frequently asked questions about cars and motorcycles

How to Dismantle the Ignition Key Cylinder of the Opel Astra G Series

Model: Vauxhall Astra Astra G - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006
Part: Key

See other generations:
Video tutorial

This guide shows how to dismantle and reassemble the ignition key cylinder of the Opel Astra G series. The first step is to remove the protective cover that supports the indicator stalk to access the key housing.

At this point, using a small screwdriver or a small punch, rotate the ignition key to a vertical position and insert the screwdriver into the hole of the cylinder housing. Slightly turn the key until you engage the release lever of the piece.

Pull out the cylinder. To reassemble the piece, press the metal tab in the key slot until it returns to its resting position.

Now you can insert the key cylinder and push it into position until it engages the locking pin.


Updated on 4 August 2026 by ScegliAuto


Related tutorials

Vauxhall Astra (2004-2010 / Astra H) This guide shows how to remove the Exhaust Gas Recirculation (EGR) valve on an Opel Astra H. The first step is to locate the valve, which is usually …
Vauxhall Astra (2004-2010 / Astra H) In this video, you will learn how to remove the airbag after removing the steering wheel from its position on the Opel Astra H series or Zafira B ser…
Vauxhall Astra (1998-2006 / Astra G) This guide shows how to remove and replace the fuel pump or float pump on the Opel Astra G, second series, in simple steps. First, remove the rear se…

    Frequently Asked Questions

    • Astra 2004-2010 - Yellow "car with wrench" warning light on Opel Astra h, what does it mean? Read answer

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos