Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the EGR Valve on an Opel Astra H?

Model: Vauxhall Astra Astra H - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: EGR valve

See other generations:
Video tutorial

This guide shows how to remove the Exhaust Gas Recirculation (EGR) valve on an Opel Astra H. The first step is to locate the valve, which is usually on the right side of the engine. Next, disconnect the power supply electrical connector using a small flathead screwdriver on the connector.

Using a 12 mm spanner, unscrew the six bolts securing the valve assembly. Be careful of the small metal gasket near the two valve inlets.

At this point, you can remove the valve actuator using the four securing screws and clean the valve with a suitable spray or brake cleaner. Refit it in position.


Updated on 28 May 2026 by ScegliAuto


Related tutorials

How to Remove the EGR Valve from an Opel Astra G
How to Remove the EGR Valve from an Opel Astra G
Vauxhall Astra (1998-2006 / Astra G) Removing the EGR valve from your car? Remove the valve, clean it or replace it. Lift the bonnet and secure it. Remove the engine cover panel. Start b…
How to Remove and Replace the EGR Valve on an Opel Astra
How to Remove and Replace the EGR Valve on an Opel Astra
Vauxhall Astra (2009-2016 / Astra J) This video shows how to remove and replace the EGR valve on an Opel Astra. Lift the bonnet and secure it, then remove the engine soundproofing panel.…
Replacing the EGR Valve on Opel Astra
Replacing the EGR Valve on Opel Astra
Vauxhall Astra (2004-2010 / Astra H) Is the EGR valve damaged? Let's see how to remove the broken part from the engine bay of an Opel Astra. Lift the front bonnet of the car and secure i…

Other guides you may be interested in

    Frequently Asked Questions

    • Astra 2009-2016 - What problems can the EGR valve of the Opel Astra J 1.7 CDTI cause? Read answer

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos