Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Pollen Filter in an Opel Insignia

Model: Vauxhall Insigna MK 1, Insigna A - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Cabin air filter

See other generations:
Video tutorial

How do you replace the pollen filter fitted in an Opel Insignia? Follow these steps for removal: open the glove compartment, unscrew the perimeter screws of the glove compartment (right side of the dashboard) with a screwdriver. Remove the cap from the filter housing (push the plastic clip), then extract the cabin filter to be replaced.

Insert a new pollen filter, ensuring it fits snugly around the walls of the housing; refit the glove compartment with the associated securing screws (close the compartment in the dashboard). Check the correct installation of the previously mounted parts.


Updated on 7 March 2026 by ScegliAuto


Related tutorials

Replacing the Cabin Air Filter on an Opel Insignia
Replacing the Cabin Air Filter on an Opel Insignia
Vauxhall Insigna (2008-2017 / MK 1, Insigna A) Need to replace the cabin air filter on an Insignia? Here's how to do it. Open the glove compartment, then unscrew the securing screws around the fra…
How to Replace the Engine Air Filter on the Opel Insignia
How to Replace the Engine Air Filter on the Opel Insignia
Vauxhall Insigna (2008-2017 / MK 1, Insigna A) Replacing the car's air filter? Let’s remove the filter on the Opel Insignia. Pull up the engine compartment release lever located at the bottom left…
How to Remove the Diesel Filter on an Opel Insignia
How to Remove the Diesel Filter on an Opel Insignia
Vauxhall Insigna (2008-2017 / MK 1, Insigna A) How to remove the diesel filter on an Opel Insignia: lift the car on a column lift or suitable jack, locate the diesel filter as shown in the video. …

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos